When I first dipped a toe in the reloading pond, I started by concentrating solely on rifles, specifically bolt guns. At this point, I see no reason to stray as I don’t shoot the volume to justify a handgun or shotgun loading habit, and my accuracy in both categories certainly hasn’t exceeded the capabilities of modern factory loads.
That’s not to say my rifle shooting prowess has exceeded the capabilities of factory match ammo either, but occasionally I want to push a projectile that isn’t loaded from the factory or tweak a factory load to shoot a bit better in my rifle of choice.
The first lesson imparted to me upon going down this path was that Hodgdon powders were the gold standard, and that if it couldn’t be done with Varget or H4350, it might not be worth doing. Furthermore, I was advised to ignore the siren song of the Alliant RL powders as their extra “oomph” came at the expense of wild swings in velocity and pressure based on ambient temperature.
The first part of that advice has served me fairly well, and I still stock up on both whenever I find either of those powders, but a press release from Alliant piqued my interest by specifically contradicting what I’d heard about the RL powders.
RADFORD, Virginia – August 18, 2016 – Alliant Powder, a leading manufacturer of smokeless powders, offers consistent long-range accuracy across temperature extremes with the release of its new Reloder 16 rifle powder. Shipments of Reloder 16 are being delivered to dealers now.
Reloder 16 utilizes TZ technology, which manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. As a result, Reloder 16, similar to Reloder 23 and AR Comp, offers world-class temperature stability. The powder has excellent lot-to-lot consistency and contains a proprietary de-coppering additive without any DNT or DBP.
The new powder is ideal for traditional hunting cartridges, such as 30-06 Spring. and 270 Win., as well as 6.5mm target loads and tactical applications wherein temperature stability is required.
At the time, I had Bergara’s 6.5 Creedmoor chambered B-14 Woodsman on test which seemed to be just the test mule for this sort of thing. A quick swipe of the Visa and several hundred Berger 140 gr. VLD Hunters were winging their way towards Texas. Add in a passel of once fired Hornady brass and some CCI BR2 primers and I had the beginnings of a fun couple nights in the shop.
At the time of this test, I had yet to see the light and discover the myriad benefits of ladder testing, so I loaded up various charge weights, shot for five shot groups, and attempted to dial in a load that I liked.
While I’m admitting errors, I didn’t end up writing down the final load, but I believe it was that 41.8 gr. weight you see above at a base to ogive length of 3.160″ which corresponded to about .020″ off the lands. The data that Alliant sent over for a 140 Sierra Game King indicated that 43.8 gr. was the maximum charge. I didn’t want to use this rifle like a test case, so I came down quite a bit in my testing and used 42.4 gr as a max load. I didn’t see any pressure signs at that personal maximum charge but accuracy did start to suffer. As I was looking to test temperature sensitivity first and foremost, I didn’t spend much time chasing tenths focusing instead on a load that was hunting accurate and safe.
I performed a similar load workup with H4350 and found a bughole load, seen above, at 40.1 gr, – .6 gr under Berger’s suggested maximum charge. Again, no pressure signs and a real winner as far as accuracy was concerned. Clumsily, I lost my H4350 load workup targets, but my memory was that the groups were slightly better with H4350 than they were with RL-16. Most of my load workups with RL-16 hovered at 1.5 MOA or better where the ones with H4350 seemed to hover around 1 MOA.
With sub MOA loads for each powder identified, I loaded up fifty rounds each with H4350 and RL-16, fired up my vacuum sealer, and got to work creating some watertight ammo packages with ten rounds each. Once that was done, I headed out to the family ranch – the only place I have access to with 110V outlets in close proximity to a safe backstop.
I decided to test each bundle of loads at five temperature ranges that were evenly spaced and covered the sort of conditions I might find in Central Texas during the course of a typical hunting season. I elected to go with 20, 55, 75, 95, and 120 degrees Fahrenheit as my testing points. Luckily, the day I picked to do this had ambient temps hovering around 60 degrees, so the 55 degree point was the only one that required any management on my part.
For the 20 degree data point, I let both bundles marinate overnight in the family freezer so they were good and chilled by the time I was ready to test. For the rest, I immersed them in a bucket of water, and used an Anova Precision Cooker to regulate the temperature for the remaining data points. The 55 degree one required that I maintained things with ice chips a bit, but I was able to reliably hold the temperature plus or minus one degree.
My testing protocol was to allow the gun to assume ambient temperature and shoot all ten rounds as fast as possible loading directly in the action without any time for the cartridge to warm to the the rapidly heating rifle. Each bag of loaded ammo was allowed to come up to the test temperature and then held for a minimum of twenty minutes before being tested. Velocity data was recorded using a barrel mounted MagnetoSpeed v3. I did not clean the barrel during the duration of the test and tested in the following order:
- H4350 @ 55
- RL-16 @ 55
- RL-16 @ 75
- H4350 @ 75
- H4350 @ 95
- RL-16 @ 95
- RL-16 @ 120
- H4350 @ 120
- H4350 @ 20
- RL-16 @ 20
When the smoke cleared, I was pleased with the data that had been collected, the lack of holes in my body, and the fact that none of my reloads had blown up. The barn cat was nowhere to be found, not surprising given the amount of indoor gunfire he’d been exposed to throughout the course of the day.
What I found was that over a one hundred degree temperature spread, the average velocity from my H4350 load varied by 67 fps from minimum to maximum. There was a nice flat band from 55 to 95 degrees where the average velocity differed by 11 fps with extreme spread over thirty rounds of 31 fps. That’s really consistent performance, in line with what the market expects from H4350. However, one either side of that band velocity deviated quite a bit. Where most of my loads had single digit SD values and extreme spread below 30 fps, the 120 degree load had a SD 16.7 and extreme spread of 60 fps. That leads me to believe that moving much beyond 120 degrees would see dangerous pressure spikes. But 120 degrees is about the hottest I’d ever want to be out hunting anyway.
RL-16 was far and away a success on the temperature sensitivity front. Across 100 degrees and fifty rounds, the average velocity only differed by 21 fps. Oddly, the coldest load was 15 fps faster than the 55 degree load. I’d be inclined to chalk that one up to a dirty and fouled barrel had the H4350 load not performed the oppostie way. Similar to the H4350 loads, I saw single digit SD values across the board with the exception of the 75 degree load which was at 11.1. I made a mistake copying numbers from the MagnetoSpeed and did not record the maximum value for that load as well. Unlucky I guess!
More interesting was that the RL-16 loads were 92 to 154 fps faster than H4350. In the middle band from 55-95 degrees, the velocities were 111-119 fps faster than H4350. At the 600 yard line in my local area with the 75 degree load, 111 fps is worth an extra .3 mils (7.5 inches) of elevation which just might be the difference between a hit or a miss.
Specifications: Alliant Reloder 16 Powder
Available Sizes: 1 lb and 8 lb
Principal Purpose: Medium Rifle
Secondary Uses: Short Magnums
Load Data: Available Here
Price: $26.99 (1 lb) or $194.99 (8 lb)
Ratings (out of five stars):
Temperature Sensitivity * * * * *
H4350 is the long reigning king of temperature stability and is the go to choice for nearly ever reloader I’ve met who is loading for .260 REM or 6.5 CM. RL-16 flat out stomped H4350 with lower absolute variation in average velocity and given the 100+fps gain in velocity, smaller deviation in variation as percentage of the average velocity.
Velocity * * * * *
The RL series of powders have always been known as speed demons, and the reason that many reloaders deal with the potential for temperature sensitivity is because the RL powders are FAST. RL-16 held up the reputation by delivering 92-154 fps more velocity at 2 grains under max against my H4350 load that was .6 gr under the listed max. If you’re looking to make them scream, RL-16 is very likely going to make you happy.
Accuracy * * * *
Generally speaking, I felt like my H4350 loads were a bit more accurate, but I really didn’t spend a lot of time chasing tenths. Both powders were able to produce multiple sub MOA five shot groups, which was plenty fine for my uses. If Alliant wants to ply me with more components, I’ll definitely chase accuracy.
Overall * * * * *
I was skeptical going into this test figuring that Alliant was all talk. What I found through the most scientific test I could put together at the time was that RL-16 produces faster velocities at well below max charges with much less variation in velocity when exposed to a broad range of temperatures. At $27/lb, it is right in the ballpark of H4350 and gives reloaders another option for powder.